| EasyB Cedar Strip Canoe molds |
|
|
|
| Written by Jon | |||
| Wednesday, 11 March 2009 13:18 | |||
|
A bit more progress, but delayed by the fact that I picked up a CCNA night class over these next two weeks. Chad and I used spray adhesive to attach our full size templates to the peg board. In our guestimation, we only bought 2 sheets of pegboard. Since we wanted a factory edge on all the molds, we actually need 1.5 sheets per boat, so off to Home depot. We actually were just going to cut what we had laid out, but a dull jigsaw blade motivated us to get in the truck and take a ride. Another 2 hour session, and all we got was 1 mold station for each boat. But hey, each week we get to hang out and putter around the garage, hopefully next week we will have the mold stations finished and mounted on the strong backs and these cedar strip canoes will start shaping up in 3d!
Oh and yes, I do have 2 seperate projects going on at once. My kayak/sculling boat is in my garage, makeing slow progress.
![]() ![]() ![]() More on this project: Click Here
|